RS23210V Users Guide and Technical Specs 


Software Revisions:

V4.01 Release Aug 2019: Applies to and for DMX input unit - fixes buffer read delay

V4.00 Release 2018: DMX input option added with DMX loop THROUGH/HOLD/NORMAL features


Previous Software Revisions:

V3.00 Release Nov 2016: PCB design change

 May 2016: Version 2.10 pdf - Scene save and recall features added RS23210V Users Guide and Technical Specs V2.10 

March 2016: Version 2 pdf  -  V2.00 - added 512 channel support (previous 256), added CTS (Clear to Send) support, increased processor speed  RS23210V Users Guide and Technical Specs V2.00 

February 2016: V1.01 added processor reset upon "R" command




Brand: ELM Video Technology

Manufacturer: ELM Video Technology

Model: RS23210V

Name: RS232 to 0-10 Volt Converter Controller Driver

UL Listings: Power Supply, PCB pre populated

MPN: RS23210V

Dimensions: 6.7"W x 2.1"H x 3.7"D

RS232-PCB:

    RS232 Input: 9600 Baud rate, 8, 1, None 

    Command String Length: 96 characters

    Command String Execute Timing: 100mS recommended

    DB9 Connections: Pin 5-gnd, pin 3-TX data (from source to the DS232 unit), pin 8-CTS (Clear to Send)

    Data Output: DMX512 output 250 kHz, 5 and/or 3 pin female XLR [Pin 1 - Power supply common, Pin 2 Data -, Pin 3 Data +]

    RDM: No

    Internal FUSE: RS232 Converter PCB - 500mA PCB mount through hole

0-10V PCB:

    Internal Fuse: SMT 750mA

    Power Input: +12VDC apx 400mA (values apx, some circuits may vary)

    8 Channel:   no load 70mA   full load 230mA

    16 Channel: no load 82mA   full load 402mA 

Voltage Output: 0~10VDC, (500 ohm minimum load)

Source Output Current: 20mA Max each

Sink Output Current: 10mA Max each

Data Type: DMX (250Khz)

Data Input: 5 (or 3) pin female XLR, [Pin 1 Not connected, Pin 2Data -, Pin 3 Data +]

RDM: No

Weight: 1.5 pounds 

Operating temperature: 32°F to 100°F

Storage temperature: 0°F to 120°F

Refresh Rate Per Second: 8 Ch's = 571, 16 Ch's = 285 (amount of times per second the outputs are updated)

External Power Supply:

    +12VDC

    Voltage Input: 100 ~ 132 (or 240) VAC

    Current Output: 1 Amps typical

    Power: 12 Watts typical



  • Equipped with 8 outputs, add 8 additional for a total of 16 outputs
  • DMX input option allows DMX scenes to be captured and stored - 3 or 5 pin XLR or Ethercon connectors - 1, 2, or 3 Universes per EtherCon (See: EtherCon Pinouts) 
  • Mounting flanges - allows the unit to be counter top, under counter, or wall mounted




Receives an RS232 signal and converts to an 0-10 volt analog signal to control a variety of equipment. Equipped with 8 channels, upgrade to 16. Available in an aluminum enclosure, mounting flanges available. See the RS232 to 0-10 volt analog converter controller category page for more information.

Includes +12VDC external power supply, solderless DB9 connector, face plate screws, and label. 

 

RS232 to 0-10 Volt Analog Converter

  • $449.00


  • 5 or more $427.00
  • 10 or more $404.00

Available Options


Related Products

RS232 to 0-10 Volt Analog Converter DIN Rail / Wall Mount

RS232 to 0-10 Volt Analog Converter DIN Rail / Wall Mount

Receives an RS232 signal and converts to an 0-10 volt analog signal to control a variety of equipmen..

$399.00

RS232 to 0-10 Volt Analog Converter

RS232 to 0-10 Volt Analog Converter

Receives an RS232 signal and converts to an 0-10 volt analog signal to control a variety of equipmen..

$449.00

Tags: dmx, rs232, converter, controller, store, 512, programmable, 10, volt, analog, desktop, ethercon