• NOTE: The 120VAC equipped version of this unit is not UL listed or certified, the power supplies are either UL Listed and/or CE certified. Some units are available with 5 volt inputs and use a wall style power supply, if this option is required/desired please contact sales.
  • Manufacturer: ELM Video Technology
  • Model: DS5-PCB
  • Name: DMX 1x5 Splitter with optional on board power supply
  • MPN: DS5-PCB
  • AC FUSE: 1 Amp
  • AC VOLTAGE: 120 VAC 60Hz
  • AC CURRENT: 55mA Max @ 120VAC under full load
  • AC Inrush Current: <0.5ms 30/60A max
  • +5VDC POWER: Apx 375mA at full load (5 outputs sourcing 32 loads each)
  • 5V Fuse: .500mA - 1A through hole
  • DATA TYPE: DMX512 (250Khz)
  • DATA INPUT: DMX512 - Pin 1 - (Shield) Not connected, Pin 2 Data - , Pin 3 Data +,
  • DATA OUTPUT: 5 Independent DMX512 outputs - Pin 1 - Power supply common, Pin 2 Data -, Pin 3 Data +
  • RDM: No
  • DIMENSIONS: With Power Supply Dimensions: 1.3" L x 3.4" W x 1.16" H (including .375" standoffs)
  • DIMENSIONS: With out Power Supply Dimensions: 1.3" L x 3.4" W x .76" H (including .375" standoffs)
  • Weight: 2 oz / 4 oz w/ power supply



  • DS5P-PCB - On board +5VDC power supply
  • DS5-PCB - No power supply on board
  • Chipset upgrade - The chipset upgrade has TVS IC's installed on the outputs offering TVS isolation on each output of the splitter.
  • LEDs installed as shown, at request they can be bottom mounted for enclosure mounting, or uninstalled
  • Screw Terminals - Input & Output
  • Wire Leads - Input & Outut
  • DIN Clips for 35mm Rail - Clips are mounted on the PCB and will snap onto a 35mm rail
  • DIN Rail 35mm x 8" 



The DS5P is a 1 In 5 out splitter PCB with optional on board power supply that will accept a DMX 512 input from any DMX generating device such as a DMX lighting board or PC based DMX device and creates 5 additional outputs (i.e. split, distribute, buffer, amplify, boost) that will each drive up to 32 devices. The DS5 has the option of an onboard power supply, just connect 120VAC and a DMX signal and get 5 DMX outputs. Gang addtional DS5 PCBs to create as many outputs as needed. Add DMX outputs to existing installations or DIY projects. To "Add to Cart" select the LED mounting style required.

The DS5 Splitter also offers **True Fault input LED indication. Choose the Chipset Upgrade for *TVS (Transient Voltage Suppression) protection on each output.


PCB FEATURES:

  • Compatible with all ELM Video Technology's DMX512 PCB's
  • Optional IC Sockets for easy chip replacement
  • Engineered with quality parts and a reliable and simple design
  • Optional on board power supply
  • On board AC input fuse (1A) and screw terminal
  • +5V Fuse (750mA)
  • LED indicators for power supply and data active (yellow)
  • 120 ohm terminating jumper
  • Design a splitter by using multiple PCB's 1x10 Splitter Example
  • Compact design and versatile uses


DS5-PCB INCLUDES:

  • Assembled DS5P-PCB (Printed Circuit Board) Assembly with (4 .375" standoffs) and screws


*TVS - A terminated and open condition is considered an unstable state, the catalog/active indication LED could be either full on or full off.  Data traffic is indicated by partially on or flickering illumination.

**TRUE FAULT - This IC features a fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be a logic high if all transmitters on a terminated bus are disabled (high impedance).

Also Note - the 5 outputs are separately driven and electronically isolated, not "Transient Voltage Suppressed" isolated from each other unless the CHIPSET UPGRADE is selected.




DMX Splitter 1x5 PCB w/ Power Supply Option

  • $95.00


  • 5 or more $90.00
  • 10 or more $86.00
  • 50 or more $81.00

Available Options


Related Products

DMX Splitter 1x4

DMX Splitter 1x4

DMX 1x4 Splitter DMX 1x4 is a 1 in 4 out splitter (distributor, buffer, amplifier, booster) that ..

$249.00

DMX Splitter 1x4 PCB

DMX Splitter 1x4 PCB

The DS4-PCB is a DMX 512 1x4 splitter (distributor, buffer, amplifier, booster) PCB with 1..

$49.00

DMX Splitter 1x5 PCB w/ Power Supply Option

DMX Splitter 1x5 PCB w/ Power Supply Option

The DS5P is a 1 In 5 out splitter PCB with optional on board power supply that will accept a DMX 512..

$95.00

DMX Splitter 1x4 Optical Input PCB

DMX Splitter 1x4 Optical Input PCB

The DSI4-PCB is a DMX *Optical Input Splitter (distributor, buffer, amplifier, or booster) PCB with ..

$49.00

DMX Splitter 1x8 PCB

DMX Splitter 1x8 PCB

The DS8D 1 In 8 out splitter PCB that can be equipped with either a standard input circuit or an opt..

$89.00

DMX Splitter 1x5 DIN Rail Wall Mount

DMX Splitter 1x5 DIN Rail Wall Mount

DMX 1x5 is a 1 in 5 out splitter  in a DIN rail/wall mount enclosure with screw terminals...

$249.00

DMX Splitter 1x4 DIN Rail Wall Mount

DMX Splitter 1x4 DIN Rail Wall Mount

DMX 1x4 Splitter DMX 1x4 is a 1 in 4 out splitter  in a DIN rail/wall mount enclosure w..

$229.00

DMX Full Isolated Input Splitter 1x5 PCB

DMX Full Isolated Input Splitter 1x5 PCB

The DS5F is a full isolated Input 1 In 5 out splitter PCB. Accepts a DMX 512 input from any DMX gene..

$89.00

DMX RDM Splitter 1x9 Full Iso Input

DMX RDM Splitter 1x9 Full Iso Input

The DSR9 is a DMX 1x9 (1 in 9 out) splitter transformer isolated input with RDM pass through. Front ..

$499.00

DMX Isolated Input Splitter 1x5 PCB

DMX Isolated Input Splitter 1x5 PCB

The DS5ISO-PCB is a 1 In 5 out splitter PCB with an isolated input IC with optional bridgeable power..

$89.00

DMX RDM Splitter 1x4 PCB

DMX RDM Splitter 1x4 PCB

The DSR-PCB is a DMX 1 in 4 out splitter with RDM pass through. Front indicators show the unit power..

$159.00

DMX RDM Wall Mount 1x4 Splitter

DMX RDM Wall Mount 1x4 Splitter

The DSR4-WM is a DMX 1 in 4 out splitter with RDM pass through. Front indicators show the unit power..

$359.00

Tags: dmx, 120vac, , splitter, 1x5, pcb, power, supply, ds5p