RDM E1.20 Compliant. Remotely setup and modify changes with an RDM Controller.
The DX10V-12/20/24 /converts/decodes a DMX signal to an analog voltage. Select the output option of either 0-12, 0-20, or 0-24 volt variable analog output. Other values can be special ordered from 12-24 volts. Control any equipment that requires a variable voltage of these ranges to control LED drivers, dimmers, motors etc. Insure the equipment controlled is within the output specs of the DX10V-12/20/24. The 12V model can source up to 15mA and sink up to 7.5mA. The 20/24V model can source up to 4mA and sink up to 2mA. Each output is assigned to a consecutive DMX channel and will vary from 0 to 12/24/24 volts in respect to the corresponding DMX channel level. Standard unit has 8 channels, available with 16 or 24 outputs. Includes 12VDC power supply. See the DX10V 0-10 volt full description category page for more information.
DMX CONTROL WARNING: NEVER use DMX data devices where human safety must be maintained.
NEVER use DMX data devices for pyrotechnics or similar controls.
- Manufacturer: ELM Video Technology
- Name: DMX 0 to 12/20/24 Volt Analog Converter Controller
- Description: The DX10V-12/20/24 converts a DMX-512 signal input to a variable 0 to either 12, 20, or 24 volt analog output.
- MPN
- 12V: DX10V-12VDC3P
- 20V: DX10V-20VDC3P
- 24V: DX10V-24VDC3P
- Model: DX10V
- UL Listings: Power supply, PCB pre populated
- CHASSIS: Anodized Aluminum .093″ thick RoHS compliant
- Internal Fuse: SMT 750mA
- Power Input: +12VDC apx 400mA (values apx, some circuits may vary)
- Voltage Output: 0~12/20/24VDC,
- Source Output Current Per Output Max:
- 12V model up to 15mA
- 20V model up to 4mA
- 24V model up to 4mA
- Sink Output Current Per Output Max:
- 12V model up to 7.5mA
- 20V model up to 2mA
- 24V model up to 2mA
- DATA TYPE: DMX (250Khz)
- Data Input: 5 (or 3) pin female XLR, [Pin 1 Not connected, Pin 2Data -, Pin 3 Data +]
- Data Loop Output: (If equipped) 5 (or 3) pin female XLR, [Pin 1 Looped from pin 1 of input XLR, Pin 2Data -, Pin 3 Data +]
- RDM: YES E1.20 Compliant [Software V8.20+]
- Dimensions: 3.7 x 6.7 x 2.1 inches
- Weight: 1.5 pounds
- Operating temperature: 32°F to 100°F
- Storage temperature: 0°F to 120°F
- Humidity: Noncondensing
- Refresh Rate Per Second: Version 8.2x+ 8 Ch’s = 1502, 16 Ch’s = 739, 24 Ch’s = 506 (amount of times per second the outputs are updated)
- Output Connections: Phoenix style terminal block
- External Power Supply (wall mount):
- 12V Model: 13.5V
- 20V Model: 24V
- 24V Model: 28V
- Voltage Input: 100 ~ 132 (or 240) VAC
- Current Output: 1 Amp
- Power: 12 Watts
- Polarization: Positive Center
- Output Connector: Locking Barrel Plug, 2.1mm I.D. x 5.5mm O.D. x 9.5mm
