DXRL DMX Relay Driver Connection and Users Guide
DMX512 CHANNEL ASSIGNMENT TABLE
SV1.00: Release Dec 2018
- Manufacturer: ELM Video Technology
- MPN: VC-20-PCB
- Dimensions: 1.3" x 3.4" x 1"
- Condition: New
- POWER INPUT:
- -24VDC at 250mA
- +12VDC at 250mA
- PCB FUSES: 250mA SMD
- CHANNEL VOLTAGE INPUT: 0 to +10VDC Variable
- CHANNEL VOLTAGE OUTPUT: 0 TO -20 VDC Variable
- CHANNEL CURRENT OUTPUT: 6mA (3.3K ohm load)
- OUTPUT RIPPLE: +/-200mV @ 500Khz
- WEIGHT: 2oz
- +12V power supply [required] which is 1/2 of required power input (could use the same 12V power supply connected to the DX10V PCB).
- +/-24V power supply [required] which is 1/2 of required power input. A separate positive 24 volt power can be used by reversing the input voltage at the -24V inputs of the PCB.
- Power Connector (Mates with listed power supply)
- DIN Clips for 35mm Rail - Clips are mounted on the PCB and will snap onto a 35mm rail
- DIN Rail 8"
- Installed screw terminals for the 8 outputs, -24 volts in, and +12 volts in
- Enclosure Labels: black on white, black on clear, or download ENCLOSURE LABELS and LEGEND
- PCB headers and interface cables available for easy connection to the DX10V-PCB
The VC-20 PCB interfaces with the DX10V-PCB (converts DMX to 0-10 volt analog signal) and converts the positive 0-10 volt signal to a negative 0-20 volt analog output. Control 0 to -20 volt LED drivers, dimmers, or any equipment that operates from a -20 analog control voltage. Each output can source and sink 6mA each.
By setting the DX10V as a switch the unit can also control solid state relay's (SSR). Each output is assigned to a consecutive DMX channel and will vary from 0 to -20 volts in respect to the corresponding DMX channels' level. Standard unit has 4 channels, upgrade with 8 channels. See the DX10V 0-10 volt full description category page for more information.
- Engineered with quality parts and a reliable and simple design
- Power LED's for both -24VDC and +12VDC input
- Preassembled VC-20-PCB (Printed Circuit Board) with (4) .375" standoffs and screws for enclosure mounting
DMX 0 to -20 Volt Analog Converter PCB
- Brand: ELM Video Technology, Inc.
- Product Code: VC-20
- Availability: Usually Ships in 1-2 Days
- 5 or more $170.00
- 10 or more $162.00
- 50 or more $153.00
- 100 or more $145.00
Tags: DMX, 512, -20, volt, converter, dimmer, controller, analog, dx10v, pcb, printed circuit board