• Manufacturer: ELM Video Technology
  • Model: DS5F-PCB
  • Name: DMX 1x5 Full Isolated Splitter
  • MPN: DS5F-PCB
  • +5VDC CURRENT: 150mA no load, 450mA at full load (5 outputs sourcing 32 loads each)
  • 5V Fuse: 1A 
  • DATA TYPE: DMX512 (250Khz)
  • DATA INPUT: DMX512 - Pin 1 - (Shield) Not connected, Pin 2 Data - , Pin 3 Data +,
  • DATA OUTPUT: 5 Independent DMX512 outputs - Pin 1 - Power supply common, Pin 2 Data -, Pin 3 Data +
  • RDM: No
  • DIMENSIONS: Without screw terminals and LED's extended: 1.3" L x 3.4" W x .788" H (including .375" standoffs)
  • DIMENSIONS: With screw terminals and LED's extended: 1.3" L x 3.4" W x .95" H (including .375" standoffs)
  • Weight: 2 oz 
  • Chipset upgrade - The chipset upgrade has TVS IC's installed on the outputs offering TVS (Transient Voltage Suppression) isolation on each output of the splitter.
  • LEDs installation:
  •         with the LED's top mounted-extended for enclosure mounting (with respective holes drilled and by moving the standoffs to the top of the PCB, the LED's are visible outside an enclosure)
  •         OR uninstalled for custom LED connections (soldering required)
  • DMX Input & Output Screw Terminals
  • DMX Input & Output Wire Leads/Tails
  • DIN Clips for 35mm Rail - Clips are mounted on the PCB and will snap onto a 35mm rail
  • DIN Rail 35mm x 8"

The DS5F is a full isolated Input 1 In 5 out splitter PCB. Accepts a DMX 512 input from any DMX generating device such as a DMX lighting board or PC based DMX device and creates 5 additional outputs (i.e. split, distribute, buffer, amplify, boost) that will each drive up to 32 devices. The DS5F features full isolation of the DMX input as well as the DMX input shield/ground connection. The DS5F offers full isolation without the loading of optical isolation. Several options available.

Gang additional DS5 PCBs to create as many outputs as needed. Add DMX outputs to existing installations or DIY projects. To "Add to Cart" select the LED mounting style required.

Optional Chipset Upgrade - TVS (Transient Voltage Suppression) protection on each output.

Note - The outputs are separately driven and electronically isolated, not "Transient Voltage Suppressed" isolated from each other unless the CHIPSET UPGRADE is selected.


PCB FEATURES:

  • Compatible with all ELM Video Technology's DMX512 PCB's
  • Optional IC Sockets for easy chip replacement
  • Engineered with quality parts and a reliable and simple design
  • LED indicators for power supply and data active
  • 120 ohm terminating jumper
  • Design a splitter by using multiple PCB's 1x10 Splitter Example
  • Compact design and versatile uses


DS5F-PCB INCLUDES:

  • Assembled DS5F-PCB (Printed Circuit Board) Assembly with (4) .375" standoffs and mounting screws


DMX Full Isolated Input Splitter 1x5 PCB

  • $89.00


  • 5 or more $85.00
  • 10 or more $80.00
  • 50 or more $76.00

Available Options


Related Products

DMX Splitter 1x4

DMX Splitter 1x4

DMX 1x4 Splitter DMX 1x4 is a 1 in 4 out splitter (distributor, buffer, amplifier, booster) that ..

$249.00

DMX Splitter 1x4 PCB

DMX Splitter 1x4 PCB

The DS4-PCB is a DMX 512 1x4 splitter (distributor, buffer, amplifier, booster) PCB with 1..

$49.00

DMX Splitter 1x5 PCB w/ Power Supply Option

DMX Splitter 1x5 PCB w/ Power Supply Option

The DS5P is a 1 In 5 out splitter PCB with optional on board power supply that will accept a DMX 512..

$95.00

DMX Splitter 1x4 Optical Input PCB

DMX Splitter 1x4 Optical Input PCB

The DSI4-PCB is a DMX *Optical Input Splitter (distributor, buffer, amplifier, or booster) PCB with ..

$49.00

DMX Splitter 1x8 PCB

DMX Splitter 1x8 PCB

The DS8D 1 In 8 out splitter PCB that can be equipped with either a standard input circuit or an opt..

$89.00

DMX Splitter 1x5 DIN Rail Wall Mount

DMX Splitter 1x5 DIN Rail Wall Mount

DMX 1x5 is a 1 in 5 out splitter  in a DIN rail/wall mount enclosure with screw terminals...

$249.00

DMX Splitter 1x4 DIN Rail Wall Mount

DMX Splitter 1x4 DIN Rail Wall Mount

DMX 1x4 Splitter DMX 1x4 is a 1 in 4 out splitter  in a DIN rail/wall mount enclosure w..

$229.00

DMX Full Isolated Input Splitter 1x5 PCB

DMX Full Isolated Input Splitter 1x5 PCB

The DS5F is a full isolated Input 1 In 5 out splitter PCB. Accepts a DMX 512 input from any DMX gene..

$89.00

DMX Splitter 1x8  1RU Rack Mount

DMX Splitter 1x8 1RU Rack Mount

DMX 1x8 splitter is equipped with 1 input and 8 outputs in a 1U 19" rack mount enclosure. The DSPr s..

$599.00

DMX RDM Splitter 1x9 Full Iso Input

DMX RDM Splitter 1x9 Full Iso Input

The DSR9 is a DMX 1x9 (1 in 9 out) splitter transformer isolated input with RDM pass through. Front ..

$499.00

DMX Isolated Input Splitter 1x5 PCB

DMX Isolated Input Splitter 1x5 PCB

The DS5ISO-PCB is a 1 In 5 out splitter PCB with an isolated input IC with optional bridgeable power..

$89.00

DMX Splitter 1x12 Optional RDM Customizable 1RU Rack Mount

DMX Splitter 1x12 Optional RDM Customizable 1RU Rack Mount

1U 19" rack mount DMX 1x12 splitter with optional RDM (Remote Device Management) pass through. The D..

$699.00

DMX RDM Splitter 1x4 PCB

DMX RDM Splitter 1x4 PCB

The DSR-PCB is a DMX 1 in 4 out splitter with RDM pass through. Front indicators show the unit power..

$159.00

DMX RDM Wall Mount 1x4 Splitter

DMX RDM Wall Mount 1x4 Splitter

The DSR4-WM is a DMX 1 in 4 out splitter with RDM pass through. Front indicators show the unit power..

$359.00

Tags: dmx, full, isolated, splitter, 1x5, pcb, ds5f