- DMX10V USER GUIDE [pdf] (Note - this document is for the standard DX10V unit for other voltage models refer to the specifications tab)
- DX10V 0-10 VOLT CONVERTER w/ LED DRIVER EXAMPLE
- DMX512 CHANNEL ASSIGNMENT TABLE
- DMX CONTROL WARNING: NEVER use DMX data devices where human safety must be maintained.
- NEVER use DMX data devices for pyrotechnics or similar controls.
- Manufacturer: ELM Video Technology
- Name: DMX 0 to 12/20/24 Volt Analog Converter Controller
- Description: The DX10V-12/20/24 converts a DMX-512 signal input to a variable 0 to either 12, 20, or 24 volt analog output.
- MPN
- 12V: DX10V-12VDC3P
- 20V: DX10V-20VDC3P
- 24V: DX10V-24VDC3P
- Model: DX10V
- UL Listings: Power supply, PCB pre populated
- CHASSIS: Anodized Aluminum .093" thick RoHS compliant
- Internal Fuse: SMT 750mA
- Power Input: +12VDC apx 400mA (values apx, some circuits may vary)
- 8 Channel: no load 70mA full load 230mA
- 16 Channel: no load 82mA full load 402mA
- Voltage Output: 0~12/20/24VDC,
- Source Output Current:
- 12V model up to 15mA
- 20V model up to 4mA
- 24V model up to 4mA Max each
- Sink Output Current:
- 12V model up to 7.5mA
- 20V model up to 2mA
- 24V model up to 2mA Max each
- DATA TYPE: DMX (250Khz)
- Data Input: 5 (or 3) pin female XLR, [Pin 1 Not connected, Pin 2Data -, Pin 3 Data +]
- Data Loop Output: (If equipped) 5 (or 3) pin female XLR, [Pin 1 Looped from pin 1 of input XLR, Pin 2Data -, Pin 3 Data +]
- RDM: No
- Dimensions: 3.7 x 6.7 x 2.1 inches
- Weight: 1.5 pounds
- Operating temperature: 32°F to 100°F
- Storage temperature: 0°F to 120°F
- Humidity: Noncondensing
- Refresh Rate Per Second: 4 Ch's = 1162, 8 Ch's = 571, 12 Ch's = 384, 16 Ch's = 285 (amount of times per second the outputs are updated)
- Output Connections: DB9 Female
- External Power Supply (wall mount):
- 12V Model: 13.5V
- 20V Model: 24V
- 24V Model: 28V
- Voltage Input: 100 ~ 132 (or 240) VAC
- Current Output (Min): 1 Amp
- Power (Min): 12 Watts
- Polarization: Positive Center
- Output Connector: Locking Barrel Plug, 2.1mm I.D. x 5.5mm O.D. x 9.5mm
- Select either 12V, 20V or 24V output model (see specifications tab for voltage and current information
- Equipped with 3 pin XLR connectors, optional 5 pin XLR's option available
- Equipped with a single DMX input, optionally add a loop thru with 3 or 5 XLR connectors (terminate if unused)
- Equipped with 8 or 16 outputs
- Mounting flanges - allows the unit to be counter top, under counter, or wall mounted
The DX10V-12/20/24 /converts/decodes a DMX signal to a preset value. Select the output option of either 0-12, 0-20, or 0-24 volt variable analog output. Other values can be special ordered from 12-24 volts. Control any equipment that requires a variable voltage of these ranges to control LED drivers, dimmers, motors etc. Insure the equipment controlled is within the output specs of the DX10V-12/20/24. The 12V model can source up to 15mA and sink up to 7.5mA. The 20/24V model can source up to 4mA and sink up to 2mA. Each output is assigned to a consecutive DMX channel and will vary from 0 to 12/24/24 volts in respect to the corresponding DMX channel level. Standard unit has 8 channels, available with 16 channels. Includes 12VDC power supply. See the DX10V 0-10 volt full description category page for more information.
DMX 0-12/20/24 Volt Analog Converter
- Brand: ELM Video Technology, Inc.
- Product Code: DX10V-12/20/24
- Availability: Usually Ships Within 2-3 Days
-
$399.00
-
- 5 or more $379.00
- 10 or more $359.00
Available Options
Related Products
DMX 0-10 Volt Analog Converter DIN Rail / Wall Mount
The DX10V-DIN converts a DMX-512 input to a variable 0 to 10 volt analog output in a 24 or 32 termin..
$279.00
DMX 0-10 Volt Analog Converter
The DX10V converts/decodes a DMX-512 input to a variable 0 to 10 volt analog output. Control 0-10 vo..
$299.00
DMX 0-10 Volt Analog Converter PCB
The DX10V-PCB converts a DMX-512 input to a variable 0 to 10 volt analog output. Control 0-10 volt L..
$159.00
DMX 0 to -20 Volt Analog Converter PCB
The VC-20 PCB interfaces with the DX10V-PCB (converts DMX to 0-10 volt analog signal) and converts t..
$179.00
DMX 0-10 Volt Analog Converter 19" 1RU Rack Mount
The DX10Vr is a DMX to 0-10 volt analog converter (other voltages available) in a 19" 1RU rackmount ..
$649.00
DMX Relay PCB with Optional 0-10 Volt
The DX10V-RL is a DMX to 8 relay control PCB with simultaneous 0-10 volt converter. Use as an 8 rela..
$319.00
DMX (4) Ch 0-10 Volt Analog Converter PCB Lot of 5
Lot of 5 custom 4 channel PCBs. The DX10V-PCB converts a DMX-512 input to a variable 0 to 10 volt an..
$629.00
DMX Power Relay PCB
The DX10V-PRL is a DMX to power (8) Relay control with simultaneous 0-10 volt converter. Use as a 8x..
$399.00
DMX Relay Driver w/ 0-10V Option
The DXRL is a DMX 512 4 (or 8) channel relay controller with optional 0-10 volt variable analo..
$379.00
DMX Relay Driver PCB w/ 0-10V Option
DXRL is a DMX 512 8 channel relay controller with optional 0-10 volt variable analog outputs. Assign..
$159.00
DMX 0-10 Volt Analog Converter PCB with Switch to Ground
CURRENTLY UNAVAILABLE - The DX10V-SG-PCB converts a DMX input to a variable 0 to 10 volt..
$259.00
Tags: DMX, 512, 0-12 volt, 0-20, 0-24 converter, dimmer, controller, analog, dx10v