• Manufacturer: ELM Video Technology
  • MPN: VC-20-PCB
  • Dimensions: 1.3" x 3.4" x 1"
  • Condition: New
  • POWER INPUT:
  •     -24VDC at 250mA
  •     +12VDC at 250mA
  • PCB FUSES: 250mA SMD
  • CHANNEL VOLTAGE INPUT: 0 to +10VDC Variable
  • CHANNEL VOLTAGE OUTPUT: 0 TO -20 VDC Variable
  • CHANNEL CURRENT OUTPUT: 6mA (3.3K ohm load)
  • OUTPUT RIPPLE: +/-200mV @ 500Khz
  • WEIGHT: 2oz



  • +12V power supply [required] which is 1/2 of required power input (could use the same 12V power supply connected to the DX10V PCB).
  • +/-24V power supply [required] which is 1/2 of required power input. A separate positive 24 volt power can be used by reversing the input voltage at the -24V inputs of the PCB.
  • Power Connector (Mates with listed power supply)
  • DIN Clips for 35mm Rail - Clips are mounted on the PCB and will snap onto a 35mm rail
  • DIN Rail 8"
  • Installed screw terminals for the 8 outputs, -24 volts in, and +12 volts in
  • Enclosure Labels: black on white, black on clear, or download ENCLOSURE LABELS and LEGEND
  • PCB headers and interface cables available for easy connection to the DX10V-PCB



The VC-20 PCB interfaces with the DX10V-PCB (converts DMX to 0-10 volt analog signal) and converts the positive 0-10 volt signal to a negative 0-20 volt analog output. Control 0 to -20 volt LED drivers, dimmers, or any equipment that operates from a -20 analog control voltage. Each output can source and sink 6mA each.

By setting the DX10V as a switch the unit can also control solid state relay's (SSR). Each output is assigned to a consecutive DMX channel and will vary from 0 to -20 volts in respect to the corresponding DMX channels' level. Standard unit has 4 channels, upgrade with 8 channels.  See the DX10V 0-10 volt full description category page for more information. 


FEATURES:

  • Engineered with quality parts and a reliable and simple design
  • Power LED's for both -24VDC and +12VDC input 


PCB INCLUDES:

  • Preassembled VC-20-PCB (Printed Circuit Board) with (4) .375" standoffs and screws for enclosure mounting

DMX 0 to -20 Volt Analog Converter PCB

  • $179.00


  • 5 or more $170.00
  • 10 or more $162.00
  • 50 or more $153.00
  • 100 or more $145.00

Available Options


Related Products

DMX 0-10 Volt Analog Converter DIN Rail / Wall Mount

DMX 0-10 Volt Analog Converter DIN Rail / Wall Mount

The DX10V-DIN converts a DMX-512 input to a variable 0 to 10 volt analog output in a 24 or 32 termin..

$279.00

DMX 0-10 Volt Analog Converter

DMX 0-10 Volt Analog Converter

The DX10V converts/decodes a DMX-512 input to a variable 0 to 10 volt analog output. Control 0-10 vo..

$299.00

DMX 0-10 Volt Analog Converter PCB

DMX 0-10 Volt Analog Converter PCB

The DX10V-PCB converts a DMX-512 input to a variable 0 to 10 volt analog output. Control 0-10 volt L..

$159.00

DMX 0-10 Volt Analog Converter 19" 1RU Rack Mount

DMX 0-10 Volt Analog Converter 19" 1RU Rack Mount

The DX10Vr is a DMX to 0-10 volt analog converter (other voltages available) in a 19" 1RU rackmount ..

$649.00

DMX Relay PCB with Optional 0-10 Volt

DMX Relay PCB with Optional 0-10 Volt

The DX10V-RL is a DMX to 8 relay control PCB with simultaneous 0-10 volt converter. Use as an 8 rela..

$319.00

DMX (4) Ch 0-10 Volt Analog Converter PCB Lot of 5

DMX (4) Ch 0-10 Volt Analog Converter PCB Lot of 5

Lot of 5 custom 4 channel PCBs. The DX10V-PCB converts a DMX-512 input to a variable 0 to 10 volt an..

$629.00

DMX Power Relay PCB

DMX Power Relay PCB

The DX10V-PRL is a DMX to power (8) Relay control with simultaneous 0-10 volt converter. Use as a 8x..

$399.00

DMX Relay Driver w/ 0-10V Option

DMX Relay Driver w/ 0-10V Option

The  DXRL is a DMX 512 4 (or 8) channel relay controller with optional 0-10 volt variable analo..

$379.00

DMX Relay Driver PCB w/ 0-10V Option

DMX Relay Driver PCB w/ 0-10V Option

DXRL is a DMX 512 8 channel relay controller with optional 0-10 volt variable analog outputs. Assign..

$159.00

DMX 0-12/20/24 Volt Analog Converter

DMX 0-12/20/24 Volt Analog Converter

The DX10V-12/20/24 /converts/decodes a DMX signal to a preset value. Select the output option of eit..

$399.00

Tags: DMX, 512, -20, volt, converter, dimmer, controller, analog, dx10v, pcb, printed circuit board