DSC5V DMX Standard Wall Switch Controller Installation Guide V5.01.pdf
Software Release 2018 : V2.20:
DSC5V DMX Standard Wall Switch Controller Installation Guide V2.20 PCB Rev 4.pdf
DSC5V DMX Standard Wall Switch Controller Wiring Diagram V2.0.pdf
Software Release Arp 2018 : V2.01:
- Bug fix: while fading up/down DMX channels 511 and 512 were intermittently fading
- Modified fade action: added fade up/down responses during fades. Previously if a switch was position was changed while fading the fade would complete before the new switch position was detected.
Software Release Mar 2018 : V2.00 - PCB redesign, power LED color change (GREEN), with added voltage fault indicator (RED) - indicating input voltage at PCB input is too high or too low.
Software Release Dec 2016 : V1.00 - DSC5V DMX Standard Wall Switch Controller Installation Guide V1.00.pdf
- Manufacturer: ELM Video Technology
- Model: DSC5V
- Name: DMX Standard Wall Switch Controller
- MPN: DSC5V-1G
- Dimensions: 1 Gang - 4.75"H x 3"W x 2"D, 4 Gang 4.75"H x 8.4"W x 2"D
- Switch Input(s): +5VDC Maximum
- DATA TYPE: DMX (250Khz)
- DATA INPUT: DMX - (Shield) Not connected, Pin 2 Data - , Pin 3 Data +
- DATA OUTPUT: DMX outputs - Pin 1 - (Shield) Power supply common, Pin 2 Data -, Pin 3 Data +
- RDM: No
- UL Listings: Power Supply, PCB pre populated
- Weight: .75 pounds
- Voltage Input Nominal: +9VDC (7.5V minimum at PCB input. e.g. a 250' CAT5 24AWG will drop the voltage by 1.5 volts. For cable lengths greater than 250' a 12VDC power supply can be used to maintain a voltage range on the input between 7.5V and 10VDC)
- Voltage Input Minimum: +7.5V Minimum at circuit board input
- Voltage Input Maximum: +12.5V Max at circuit board input
- CURRENT INPUT: 125mA
- Internal FUSE: 500mA PCB SMT
- External Power Supply: +9VDC wall mount
- Voltage Input: 100 ~ 240 VAC 50/60hz
- Upgrade to a 2, 3 or 4 switch unit
The DSC5V is a DMX scene controller that uses a standard wall switch available with 1, 2, 3, or 4 switch(es). Store up to 4 static scenes and then recall just by turning on the respective switch. PLEASE NOTE: The DSC5V is intended for a single entry system, for multiple wall switch control see our DMSC Wall Station Controller.
Great for churches, theatres (theaters), and similar venues to easily turn on DMX controlled lights without having to turn on and use a DMX lighting board or controller. For example switch 1 could be "Band Practice", switch 2 "Stage Lights", switch 3 "Audience Lights", switch 4 "Balcony". Simply flip any of the switches and the pre recorded scene will turn on with optional 5 second fade. If the "Merge" function is turned off then any DMX input will OVERRIDE the switches and take control allowing a DMX controller to control the lights. Turn off the DMX controller and the switches again are operable. The switch/scenes are HTP (highest takes precedence) merged with each other allowing any or all switches to turn on it's respective scene. DMX scenes are easily recorded to any of the switches from the front of the unit. Installation required, ships with 9V power supply. Unit ships with PCB, power supply, switch(es) and switch plate pre assembled. Wall gang box and wire/cable not included.
- Recall a DMX Scene by simply turning on a switch
- Optional 5 second fade up/down
- Optional Merge/Override DMX input function
DMX Standard Wall Switch Controller
- Brand: ELM Video Technology, Inc.
- Product Code: DSC5V
- Availability: Usually Ships in 1-2 Days
- 5 or more $189.00
Tags: dmx, standard, wall, switch, controller, scene, 4, store