• POWER INPUT: 100 ~ 240 50 ~ 60Hz, 0.3A
  • POWER USAGE: apx .43 watts, 5VDC at 85mA with 32 devices connected
  • DATA TYPE: DMX512 (250Khz)
  • DATA INPUT: DMX512 - 5 (or 3) pin male XLR, Pin 1 - (Shield) Not connected, Pin 2 Data - , Pin 3 Data +
  • INPUT IC: Standard electronic isolation, check listing for chipset (Isolation) upgrade options
  • DATA OUTPUT: DMX512 output - 5 (or 3) pin female XLR, Pin 1 - Power supply common, Pin 2 Data -, Pin 3 Data +
  • RDM: No
  • UL Listings: Power Supply, PCB pre populated
  • DIMENSIONS: 4” x .77” (excluding female release tab dimensions)





5 pin XLR for both ends or combination of 3 & 5 pins




The DXT is a DMX 512 In Line Buffer (Driver) through XLR connector (3 or 5 pin). Connect to any DMX 512 universe, daisy chain, or DMX control line and connect up to 32 additional devices. Install between any device that needs DMX buffering (or redriving) Features a power LED and a data / active LED.  Includes an attached power supply as shown.  If you need voltage protection and true fault LED indications, the chipset can be upgraded which provides TVS (Transient Voltage Suppression)  protection IC and a true fault input indication IC.  Please Note: This is a NON-Returnable Product.


DMX In Line Buffer / Driver

  • $199.00


Available Options


Related Products

DMX Optical Input Isolator In Line PCB

DMX Optical Input Isolator In Line PCB

DMX Optical Isolator DXI-PCB is a DMX 512 In Line Optical Isolator PCB. With the tiny footprint i..

$39.00

DMX Optical Input Isolator In Line

DMX Optical Input Isolator In Line

DMX Optical Isolator DXI - DMX 512 In Line Optical Isolator The DXI is a DMX 512 Optically Isolat..

$199.00

DMX In Line Buffer / Driver

DMX In Line Buffer / Driver

The DXT is a DMX 512 In Line Buffer (Driver) through XLR connector (3 or 5 pin). Connect to any DMX ..

$199.00

DMX In Line Buffer/Driver PCB

DMX In Line Buffer/Driver PCB

The DXT-PCB is a DMX 512 In Line Buffer PCB. With the tiny footprint PCB, install in any device that..

$39.00

DMX Full Optical Isolated PCB with Power Supplies

DMX Full Optical Isolated PCB with Power Supplies

The DBOP-PCB is a 1 in 1 out DMX 512 opto iso buffer with on board power supplies for added isolatio..

$125.00

DMX Optical Isolator Input In Line XLR

DMX Optical Isolator Input In Line XLR

The DOXM-XLR Module is a DMX 512 Input Optical Isolator XLR module. Replace any XLR input connector ..

$49.00

DMX Output Buffer Driver XLR Mounted Module

DMX Output Buffer Driver XLR Mounted Module

The DBXF-XLR Module is a daisy chainable DMX 512 Buffer/Driver Output XLR Mounted Module. Add or rep..

$42.00

DMX Splitter 1x12 Optional RDM Customizable 1U Rack Mount

DMX Splitter 1x12 Optional RDM Customizable 1U Rack Mount

1U 19" rack mount DMX 1x12 splitter with optional RDM (Remote Device Management) pass through. The D..

$749.00