ELM Video Technology, Inc.
The DLA is a DMX receive (only) dual input analyzer PCB. See the DLA-HH page or users guide fo..
DLA-HH - Portable DMX 512 LCD (receive only) Analyzer (analyser) is a hand held DMX analyzer. This s..
The DCRD-PCB is a DMX input channel reassignment module. Reassigns the DMX start channel of a fixtur..
The DS5F is a full isolated Input 1 In 5 out splitter PCB. Accepts a DMX 512 input from any DMX gene..
The DBOP-PCB is a 1 in 1 out DMX 512 opto iso buffer with on board power supplies for added isolatio..
The DXT is a DMX 512 In Line Buffer (Driver) through XLR connector (3 or 5 pin). Connect to any DMX ..
The DXT-PCB is a DMX 512 In Line Buffer PCB. With the tiny footprint PCB, install in any device that..
DMG DMX 512 Merger Features and FunctionsNOTE: New modes and PCB dip switches added since video was ..
DXI - DMX 512 In Line Optical Isolator The DXI is a DMX 512 Optically Isolated through connector des..
DXI-PCB is a DMX 512 In Line Optical Isolator PCB. With the tiny footprint install the PCB in any de..
The DOXM-XLR Module is a DMX 512 Input Optical Isolator XLR module. Replace any XLR input connector ..
The DBXF-XLR Module is a daisy chainable DMX 512 Buffer/Driver Output XLR Mounted Module. Add or rep..
The DPM PCB is a DMX to 4 channel with 8 bit resolution or 2 channel with 16 bit resolution PWM cont..
The DPM is a 4 channel 8 bit OR 2 channel 16 bit PWM driver in an aluminum enclosure. Useful for dri..
The DPM PCB is a DMX to 4 channel with 8 bit resolution OR DMX to 2 channel with 16 bit resolution P..
Replaced with the DXRL
DISCONTINUED - DPM-RL is a DMX 512 Relay Driver. Assign a DMX start channel,..
DPM-RL/Coil-PCB The DPM-RL/Coil is a DMX 512 Relay (Driver) PCB. Mates with the DPM4-PCB and control..
DPM-RL/SSR-PCB is DMX 512 Relay Driver PCB. Mates with the DPM4-PCB and controls 2 outputs with 2 am..
The DPM4 PCB is a DMX to 5V solid state relay (SSR) controller (15mA MAX). Useful for controlling 12..
DMX 1x4 is a 1 in 4 out splitter (distributor, buffer, amplifier, booster) that takes the output of ..
DMX 1x4 is a 1 in 4 out splitter in a DIN rail/wall mount enclosure with screw terminals...
The DSI4-PCB is a DMX *Optical Input Splitter (distributor, buffer, amplifier, or booster) PCB with ..
The DS4-PCB is a DMX 512 1x4 splitter (distributor, buffer, amplifier, booster) PCB with 1..
DMX 1x5 is a 1 in 5 out splitter in a DIN rail/wall mount enclosure with screw terminals...
The DS5 is a 1 In 5 out splitter PCB with optional on board power supply that will accept a DMX 512 ..
Showing 1 to 25 of 68 (3 Pages)