Products meeting the search criteria
The DLA is a DMX receive (only) dual input analyzer PCB. See the DLA-HH page or users guide fo..
DLA-HH - Portable DMX 512 LCD (receive only) Analyzer (analyser) is a hand held DMX analyzer. This s..
The DS5F is a full isolated 1 In 5 out splitter PCB. Accepts a DMX 512 input from any DMX generating..
The DBOP-PCB is a 1 in 1 out DMX 512 opto iso buffer with on board power supplies for added isolatio..
DMG DMX 512 Merger Features and FunctionsNOTE: New modes and PCB dip switches added since video was ..
DXI - DMX 512 In Line Optical Isolator The DXI is a DMX 512 Optically Isolated through connector des..
DXI-PCB is a DMX 512 In Line Optical Isolator PCB. With the tiny footprint install the PCB in any de..
The DOXM-XLR Module is a DMX 512 Input Optical Isolator XLR module. Replace any XLR input connector ..
The DBXF-XLR Module is a daisy chainable DMX 512 Buffer/Driver Output XLR Mounted Module. Add or rep..
The DPM PCB is a DMX to 4 channel with 8 bit resolution or 2 channel with 16 bit resolution PWM cont..
The DPM is a 4 channel 8 bit OR 2 channel 16 bit PWM driver in an aluminum enclosure. Useful for dri..
The DPM PCB is a DMX to 4 channel with 8 bit resolution OR DMX to 2 channel with 16 bit resolution P..
Replaced with the DXRL
DISCONTINUED - DPM-RL is a DMX 512 Relay Driver. Assign a DMX start channel,..
DPM-RL/Coil-PCB The DPM-RL/Coil is a DMX 512 Relay (Driver) PCB. Mates with the DPM4-PCB and control..
DPM-RL/SSR-PCB is DMX 512 Relay Driver PCB. Mates with the DPM4-PCB and controls 2 outputs with 2 am..
DMX 1x4 is a 1 in 4 out splitter (distributor, buffer, amplifier, booster) that takes the output of ..
DMX 1x4 is a 1 in 4 out splitter in a DIN rail/wall mount enclosure with screw terminals...
The DSI4-PCB is a DMX *Optical Input Splitter (distributor, buffer, amplifier, or booster) PCB with ..
The DS4-PCB is a DMX 512 1x4 splitter (distributor, buffer, amplifier, booster) PCB with 1..
DMX 1x5 is a 1 in 5 out splitter in a DIN rail/wall mount enclosure with screw terminals...
The DS5 is a 1 In 5 out splitter PCB with optional on board power supply that will accept a DMX 512 ..
The DS8D 1 In 8 out splitter PCB that can be equipped with either a standard input circuit or an opt..
The DSC5V is a DMX scene controller that uses a standard wall switch available with 1, 2, or 4 switc..
The DTR-PCB is a DMX 512 tester data send / receive PCB with 10 store and recall preset scene snapsh..
The DTR-HH is a DMX 512 tester data send / receive unit with 10 store and recall preset scene snapsh..
Showing 1 to 25 of 53 (3 Pages)