Previous Revisions:


  • DMX CONTROL WARNING: NEVER use DMX data devices where human safety must be maintained.
  • NEVER use DMX data devices for pyrotechnics or similar controls.
  • Manufacturer: ELM Video Technology
  • Name: DMX 0 to 10 Volt Analog Converter
  • Description: The DX10V converts a DMX-512 input to a variable 0 to 10 volt analog output.
  • Model/MPN (base): DX10Vr
  • UL Listings: Power supply, PCB pre populated
  • Condition: New
  • CHASSIS: Anodized Aluminum .093" thick RoHS compliant
  • External Fuse: 2A 5x20mm
  • PCB Fuse: SMT 1A
  • Voltage Output: 0~10VDC, (500 ohm minimum load)
  • Source Output Current: 20mA Max each
  • Sink Output Current: 10mA Max each
  • DATA TYPE: DMX (250Khz)
  • Data Input: 5 (or 3) pin female XLR, [Pin 1 Not connected, Pin 2Data -, Pin 3 Data +]
  • Data Loop Output: (If equipped) 5 (or 3) pin female XLR, [Pin 1 Looped from pin 1 of input XLR, Pin 2Data -, Pin 3 Data +]
  • RDM: YES E1.20 Compliant [Software V8.20+]
  • Dimensions: 19 x 1.75 x 8 inches
  • Weight: 9 pounds 
  • Operating temperature: 32°F to 100°F
  • Storage temperature: 0°F to 120°F
  • Humidity: Noncondensing
  • Refresh Rate Per Second Per PCB: (Version 8.2x+) 8 Ch's = 1502, 16 Ch's = 739, 24 Ch's = 506 (amount of times per second the outputs are updated)
  • Output Connections: DB9 Female
  • External Power Supply: +12VDC wall style
  •     Voltage Input: 100 ~ 132 (or 240) VAC
  •     Current Output (Min): 2 Amps
  •     Polarization: Positive Center
  •     Output Connector: Locking Barrel Plug, 2.1mm I.D. x 5.5mm O.D. x 9.5mm

See the DX10V Product Page and the DX10V-PCB for additional specifications



  • Equipped with a single DMX input, optionally add a loop thru with 3 or 5 XLR connectors (terminate if unused)
  • Front power switch is optional
  • Equipped with 8 channel outputs, optional 16 ~ 64 channel outputs


** Now RDM E1.20 Compliant. Remotely setup and modify changes with an RDM Controller.

The DX10Vr is a DMX to 0-10 volt analog converter (other voltages available) in a 19" 1RU rackmount enclosure.  With the customizable 1RU enclosure, add features or design your own. The 12" deep enclosure has plenty of space for additional circuitry that can be added (factory or end user). Many possibilities are available! Call or email sales for your custom configuration or design needs. Includes solderless DB9 screw terminal connector(s) and external power supply. Base unit has 8 outputs, optionally add up to 64 outputs. See the DX10V Product Page and the DX10V-PCB for additional functional definitions and information. Note: If custom output voltages are required, most can be preset, for example 0-5 volts, 0-20 volts, 0-24 volts etc-contact us for custom voltages.

Stock photo front and back example shown. 

For optical or buffer protection see these options: Inline Opto Isolator PCB, In line Buffer PCB, Full Optically Isolated Buffer, or Full Optically Isolated Buffer. 

Call or email sales today!


EXPAND


DMX 0-10 Volt Analog Converter 19" 1RU Rack Mount

  • $649.00


Available Options


Related Products

DMX 0-10 Volt Analog Converter

DMX 0-10 Volt Analog Converter

**NEW** Now RDM E1.20 Compliant. Remotely setup and modify changes with an RDM Controller. The DX10V..

$349.00

DMX 0-10 Volt Analog Converter PCB

DMX 0-10 Volt Analog Converter PCB

** Now RDM E1.20 Compliant. Remotely setup and modify changes with an RDM Controller.The DX10V-PCB c..

$159.00

DMX 0-10 Volt Analog Converter 19" 1RU Rack Mount

DMX 0-10 Volt Analog Converter 19" 1RU Rack Mount

** Now RDM E1.20 Compliant. Remotely setup and modify changes with an RDM Controller.The DX10Vr is a..

$649.00

DMX 2A Relay PCB with 0-10 Volt

DMX 2A Relay PCB with 0-10 Volt

The DX10V-RL is a DMX to 8 relay control PCB with simultaneous 0-10 volt converter. Use as an 8 rela..

$319.00

DMX (4) Ch 0-10 Volt Analog Converter PCB Lot of 5

DMX (4) Ch 0-10 Volt Analog Converter PCB Lot of 5

Now RDM E1.20 Compliant. Remotely setup and modify changes with an RDM Controller.Lot of 5 custom 4 ..

$629.00

DMX 16A Power Relay PCB with 0-10 Volt

DMX 16A Power Relay PCB with 0-10 Volt

The DX10V-PRL is a DMX to power (8) Relay control with simultaneous 0-10 volt converter. Use as a 8x..

$399.00

DMX Relay Driver w/ 0-10V Option

DMX Relay Driver w/ 0-10V Option

The  DXRL is a DMX 512 4 (or 8) channel relay controller with optional 0-10 volt variable analo..

$379.00

DMX Relay Driver PCB w/ 0-10V Option

DMX Relay Driver PCB w/ 0-10V Option

DXRL is a DMX 512 8 channel relay controller with optional 0-10 volt variable analog outputs. Assign..

$159.00

DMX 0-12/20/24 Volt Analog Converter

DMX 0-12/20/24 Volt Analog Converter

** Now RDM E1.20 Compliant. Remotely setup and modify changes with an RDM Controller.The DX10V-12/20..

$399.00

DMX 0-10 Volt Analog Converter PCB with Switch to Ground

DMX 0-10 Volt Analog Converter PCB with Switch to Ground

The DX10V-SG-PCB converts a DMX input to a variable 0 to 10 volt analog output and if the DMX level ..

$259.00

DMX 0-10 Volt Analog Converter Wall Mount

DMX 0-10 Volt Analog Converter Wall Mount

The DX10V-WM is a DMX to 0 10 volt converter in a wall mount aluminum enclosure and phoenix screw te..

$329.00

Tags: DMX, 512, 0-10 volt, converter, dimmer, controller, analog, dx10v, 1U, 1RU