Please note: DSR4-PCB V1.01 hardware & firmware is a beta release with limited field test data
DSR RDM Splitter Operation Guide .pdf
DSR4-PCB Connection Diagram .pdf
- Manufacturer: ELM Video Technology
- MPN/?Model: DSR4-PCB
- Name: DMX 1x4 Splitter w RDM Pass Through
- UL Listings: PCB pre populated
- FUSE: 500mA SMT or optional 5x20 mm
- POWER: Apx 450mA with 4 outputs sourcing 32 loads each
- DATA TYPE: DMX512 (250Khz)
- DATA INPUT: DMX512 - Pin 1 - (Shield) Not connected, Pin 2 Data - , Pin 3 Data +,
- DATA OUTPUT: 4 separate DMX512 outputs - Pin 1 - Power supply common, Pin 2 Data -, Pin 3 Data +
- RDM: Pass Through
- Dimensions: 1.3"L x 3.4"W x H range from .6" to 1" with standoffs
- Weight: 2 oz
- Chipset Upgrade - The chipset upgrade has TVS IC's installed on the outputs offering TVS (Transient Voltage Suppression) isolation on each output of the splitter. This is recommended if the PCB's or wiring is installed in hazardous areas, near 120VAC or higher lines, or e.g. water fountain's or shows.
- IC Sockets - Easily replace chips by adding IC sockets
- 5V Power Supply - wall style power supply compatible with the PCB
- LED Mounting - Standard style is top surface mounted LED's. Select BOTTOM MOUNT - if the PCB will be mounted on the backside of a faceplate with external LED visibility through a faceplate. Select - UNISTALLED if the LEDs will be extended to a panel, unused, or if unsure of the mounting style.
- DIN Clips - for 35mm Rail - Clips are mounted on the PCB and will snap onto a 35mm rail
- DIN Rail - 35mm x 8"
The DSR-PCB is a DMX 1 in 4 out splitter with RDM pass through. Front indicators show the unit power and data status including RDM. The DSR4 DMX Splitter (distributor, buffer, amplifier, booster) actively splits the DMX signal providing 4 separate DMX outputs. The outputs are electronically isolated from each other and each output can source up to 32 devices (DMX512 standard). For improved output isolation select the chipset upgrade for TVS "Transient Voltage Suppression" chips installed (recommended if the DMX wiring is near power lines and/or used outdoors).
FEATURES INCLUDE:
- 1 In 4 Out Splitter w/ RDM Pass Through and Bypass Jumper
- Engineered with quality parts and a reliable design
- Power, DMX Data, and RDM (if selected) LED indicators
DMX RDM Splitter 1x4 PCB
- Brand: ELM Video Technology, Inc.
- Product Code: DSR4-PCB
- Availability: Usually Ships in 1-2 Days
-
$159.00
-
- 5 or more $151.00
- 10 or more $143.00
- 50 or more $135.00
- 100 or more $127.00
Available Options
Related Products
DMX Splitter 1x4
DMX 1x4 Splitter DMX 1x4 is a 1 in 4 out splitter (distributor, buffer, amplifier, booster) that ..
$249.00
DMX Splitter 1x4 PCB
The DS4-PCB is a DMX 512 1x4 splitter (distributor, buffer, amplifier, booster) PCB with 1..
$49.00
DMX Splitter 1x5 PCB w/ Power Supply Option
The DS5P is a 1 In 5 out splitter PCB with optional on board power supply that will accept a DMX 512..
$95.00
DMX Splitter 1x4 Optical Input PCB
The DSI4-PCB is a DMX *Optical Input Splitter (distributor, buffer, amplifier, or booster) PCB with ..
$49.00
DMX Full Isolated Input Splitter 1x5 PCB
The DS5F is a full isolated Input 1 In 5 out splitter PCB. Accepts a DMX 512 input from any DMX gene..
$89.00
DMX Isolated Input Splitter 1x5 PCB
The DS5ISO-PCB is a 1 In 5 out splitter PCB with an isolated input IC with optional bridgeable power..
$89.00
DMX Splitter 1x12 Optional RDM Customizable 1U Rack Mount
1U 19" rack mount DMX 1x12 splitter with optional RDM (Remote Device Management) pass through. The D..
$749.00