V8.2x DX10V USER GUIDE V8.2x - RDM E1.20 Compliant
V8.2x RDM Addendum
V8.xx DMX512 CHANNEL ASSIGNMENT TABLE A [pdf] or use a DMX Calculator App
DX10V 0-10 VOLT CONVERTER w/ LED DRIVER EXAMPLE
DX10V CONNECTION DIAGRAM [pdf]

Previous Revisions:
V8.1x: DX10V USER GUIDE V8.1x pdf
V8.1x: DMX512 CHANNEL ASSIGNMENTs are conventional (channel 0 = no operation, ch 1 = dip 1 up, etc)
V8.1x: DX10V CONNECTION DIAGRAM [pdf]
V7.1x: DX10V USER GUIDE V7.1x pdf
V7.1x: DX10V CONNECTION DIAGRAM [pdf]
DMX512 CHANNEL ASSIGNMENT TABLE V1 through V7.xx [pdf]
DMX10V USER GUIDE Hardware Rev 6 [pdf]
DMX10V USER GUIDE Revision 2-5 [pdf]

DMX CONTROL WARNING: NEVER use DMX data devices where human safety must be maintained.
NEVER use DMX data devices for pyrotechnics or similar controls.
Manufacturer: ELM Video Technology
Brand: ELM Video Technology
Model/MPN (base): DX10V-DIN
Name: DMX 0 to 10 Volt Analog Converter Switch Relay Driver
UL Listings: Power supply, PCB pre populated
20 Terminal Dimensions: 2.75" Height x 3.9" Width x 4.4" Depth
32 Terminal Dimensions: 2.75" Height x 5.9" Width x 4.4" Depth
Condition: New
CHASSIS: ABS Plastic
POWER INPUT: 12VDC
Internal Fuse: SMT 1A
Power Input: +12VDC apx 400mA (values apx, some circuits may vary)
4 Channel: no load:64mA full load 145mA
8 Channel: no load 70mA full load 230mA
12 Channel: no load 76mA full load 316mA
16 Channel: no load 82mA full load 402mA
24 Channel: no load 94mA full load 574mA
Voltage Output: 0~10VDC, (500 ohm minimum load)
Source Output Current: 20mA Max each
Sink Output Current: 10mA Max each
Refresh Rate Per Second: (Version 8) 8 Ch's = 1502, 16 Ch's = 739, 24 Ch's = 506 (amount of times per second the outputs are updated)
DATA TYPE: DMX (250Khz)
DATA INPUT: DMX - 5 (or 3) pin male XLR, Pin 1 - (Shield) Not connected, Pin 2 Data - , Pin 3Data +
DATA OUTPUT: DMX outputs - 5 (or 3) pin female XLR's, Pin 1 - Power supply common, Pin 2Data -, Pin 3 Data +
RDM: YES E1.20 Compliant [Software V8.20+]
Weight: apx 1 lb shipping weight

Equipped with 8 outputs, optional 16 outputs - Note- for the 16 output version all 0-10v outputs and the power supply common are shared
Upgrade to a 32 terminal DIN box for additional outputs (contact us with your project needs)
Enclosure can be wall mounted or clips directly to a 35mm Rail
DIN Rail 35mm x 8"

** Now RDM E1.20 Compliant. Remotely setup and modify changes with an RDM Controller.

[Limited availability see DX10V-WM] The DX10V-DIN converts a DMX-512 input to a variable 0 to 10 volt analog output in a 24 or 32 screw terminal DIN rail/wall mountable enclosure. Control 0-10 volt LED drivers or dimmers, for example, from a DMX lighting board or DMX controller. Also has a 'switch' option for controlling solid state relay's (SSR). Each output can source up to 20mA and sink up to 10mA. Each output is assigned to a consecutive DMX channel and will vary from 0 to 10 volts in respect to the corresponding DMX channels' level. Standard unit has 8 channels, upgrade to 16 channels. Includes. See the DX10V 0-10 volt full description category page for more information. Note: If custom output voltages are required, most can be factory preset, for example 0-5 volts, 0-20 volts, 0-24 volts etc-contact us for custom voltages.

Most of ELM Video Technology's PCB's can be mounted in the enclosure and depending on the PCBs / functions needed. Any combination of DMX splitters, DMX mergers, DMX 0-10V converters, DMX relay controls, RS232 to DMX converters can be installed in this enclosure and custom wired. The 20 terminal box will hold 1 to 6 PCB's, and the 32 terminal box will hold up to 8 PCB's. Mounts on a 35mm rail or wall mounts. Price includes PCBs mounted and ready to use. Unsure if your design needs will fit, contact Sales for more information.

Includes +12VDC external power supply, face plate screws, and label. Din rail sold separately.

EXPAND